How to Make Fabric-Covered Vertical Blinds?(Sheer Vertical Blinds)

Sheer Vertical Blinds

Covering your vinyl vertical blinds with fabric can add instant warmth to the room, replacing the stark, white look of the blinds with a beautiful fabric. You can customize the look of your vertical blinds when you purchase the fabric of your choice, then apply that fabric to the blinds using an easy-to-use adhesive backing.


STEP 1
Measure the length and width of each vertical blind. The standard width of vertical blind slats is 3.48 inches. Multiply that times the number of vertical blinds you want to cover, then multiply the length times the number of vertical blinds you want to cover. That's the amount of fabric you need for this project.


STEP 2
Cut your fabric into panels that are 3 7/16 inches wide and as long as your vertical blind slats. You need one piece of fabric for each slat you want to cover.


STEP 3
Purchase pressure-sensitive vertical backing material, which acts similar to double-stick tape. Cut the vertical backing material to the length of your vertical blind slats.


STEP 4
Remove one side of the adhesive covering on the vertical backing material and adhere it to your vertical blind slat.


STEP 5
Pull the other adhesive covering off the vertical baking material to expose the adhesive.


STEP 6
Lay your fabric on the adhesive, applying pressure so it sticks to the vertical blind slat. To prevent air bubbles, start rubbing your fabric in the middle, working your way out.


SOURCE(S) :http://www.ehow.com/how_5564652_make-fabriccovered-vertical-blinds.html 


Sheer Vertical Blinds

How to Trim Vertical Blinds? (Sheer Vertical Blinds)

Sheer Vertical Blinds
You will learn how to trim your vertical blinds by follow up this instructions.

STEP 1

First remove all the blinds from the track by just holding the blind and push it up as high as it can go and slide it to the side and it should come off, if not you have to pry one of the plastic hook open while you sliding the blind side way and leave one of the blinds up.

STEP2

Using the one blind hanging mark exactly where you want to cut the rest of the blinds to. When you bring that blind down you have to mark that blind down as master copy. If you keep using different blind to make your cutting the length of the blind will increase.

STEP 3

Using your dry square or line up another blind on top of the master copy make sure the sides are even, line up the end of the top blind with the mark on the bottom blind and draw your line across. It is important that you cut a straight square line because it will be uneven on the bottom after you hang the blinds.

SOURCE(S) : http://www.ehow.com/how_4775623_trim-vertical-blinds.html
Sheer Vertical Blinds

How to Make Sheer Austrian Shades?(Sheer Vertical Blinds)

Sheer Vertical Blinds

Austrian shades, also known as Austrian blinds, are a variation on the Roman blind, in which the fabric is pulled up in large sections. Even when the blind is not pulled up, there is a scalloped look to the shades. Austrian shades are very ornate and are usually made from sheer materials and have frills. Because they are sheer, it is always a good idea to line the shades. The method for making Austrian shades is fairly straightforward, but it takes a lot of time.

Measuring and Cutting

Mount the Austrian blind track according to how you wish the shades to hang. If the shade will hang inside the windowsill, screw the track to the inside top of the window recess. If the blind will hang outside the windowsill, screw the track into the wall above the window recess.

Measure the flat length of the shade by measuring from the top of the track to the bottom of the window recess. Add 20 inches to this number to cover the top and bottom hems, and also to allow for some fullness. Add extra if your fabric is patterned and you need to match the pattern when sewing the shades. Make a note of this measurement.

Calculate the width of the shade by measuring the width of the track. Double this measurement to allow for fullness. Note this measurement.

Calculate the fabric needed for the frills. Double the measurement in Step 2 and add it to the measurement in Step 3. Double the result. This gives you twice the length of frill fabric compared to the length of the edge frilled. Keep in mind that for a 3-inch wide frill, you will need a 4-inch strip that should be cut from across the fabric's width.

Cut out all the fabric and lining needed according to your measurements.

Sewing

Make the main part of the shade. If it requires more than one width of fabric to cover the window, sew the panels together with a flat seam and press them open. Use a full panel in the middle with equal parts on each side. Be careful to match the pattern.

Repeat this procedure for the lining of the shade.

Sew the frill strips together with a 1/2-inch French seam to make one long strip. Remember to match the pattern. Hem each end and the bottom with a 1/4-inch hem. Sew two rows of gathering stitches along the top, and gather the frill strip evenly so that it measures the width of the blind plus twice the height.

Sew the frill strip to the shade. Start an inch down from the top of the blind on both sides, with the frill lying on the main shade, right sides together. Position the frill strip evenly around the edge of the main blind and pin in place. Stitch in place 1/2-inch from the edge and remove pins and gathering thread.

Add the lining. With the blind lying right side up and the frills folded toward the center, place the lining face down on the blind. Pin and sew 1/2 inch from edges on the bottom and both sides. Remove pins. Turn the shade right side out and press.

Attach the Austrian blind tape. Measure two lengths of the tape a little longer than the shade. Pin the tape lengths on the lining side of the shade vertically next to each frill. Make sure the first loop on each tape is two inches above the frill on the bottom and that the loops of both lengths of tape are lined up with each other. Fold the bottom 1/2-inch of tape under and sew the tape lengths in place, stitching both sides in the same direction so that it does not pucker.

Sew on additional lengths of tape parallel to the first two across the shade. Pin and stitch them 12 to 20 inches apart at equal distances, depending on the width of your shade. Turn the bottom edge under and make sure all the loops line up across the shade as above.

Finish the top edge. Stitch a 1-inch hem across the top edge of the shade. Press. Tie knots in the ends of the pull strings of the heading tape on one end, leaving them free on the other end. Sew on a string tidy bag two inches from that corner of the blind.

Pin the tape to the blind at the top with the top edge even with the top edge of the blind. Sew the heading tape at the top and bottom edges in the same direction to prevent puckering. Turn the ends under 1 inch.

Hanging

Add the nylon cords. Cut a piece of nylon cord for each strip of Austrian shade tape on the shade. Make them twice the length of the shade plus one times the width. Tie one end of a cord to the bottom loop of the right-most length of tape on the back of the shade. Thread it up through all the loops on that tape. Repeat for all the lengths of tape.

Adjust the heading tape. Pull the free ends of the heading tape strings to make the blind fit the width of the blind track. Even out the gathers. Tie the strings together in a sliding loop, wind them up and place them in the tidy bag.

Insert curtain hooks into the heading tape pockets and hang the shade on the blind track.

Pass the nylon cords through the cord holders on the blind track so that they all hang down on one side. When the blind is even with the windowsill, cut the nylon cords level with the bottom of the window. Pass the cords through the acorn and tie them in a knot.

Screw a wall cleat halfway up the side of the window where the nylon cords hang. Use it to wind the cords around when the blind is pulled up.

SOURCE(S) : http://www.ehow.com/how_6027392_make-sheer-austrian-shades.html

Sheer Vertical Blinds

How to Make Vertical Blinds From Fabric?(Sheer Vertical Blinds)

Sheer Vertical Blinds

Fabric covered vertical blinds can update a look of any room and coordinate with home decor. It is possible to get new blinds for less by covering vertical blinds with the fabric of your choice. Since the track and slats are all in place, all you need to do is secure the fabric to the slats with an adhesive. Follow these simple directions to creating your own fabric vertical blinds.

STEP 1

Determine the height and width of the vertical blind slats so you know how much fabric to purchase. Add three inches to the length and width to account for mistakes. The average vertical blind slat is about 3.5 inches wide and about 60 inches in height.

STEP 2

Purchase fabric from an arts and crafts store. Keep in mind if you are using a pattern how it will look on the blinds when you cut it. You will want a light weight fabric such as polyester or acrylic blends. These materials are virtually fade resistant and fray less than other fabrics.

STEP 3

Remove the blinds from the window and place them on a large flat surface. Pull each blind slat out. Trace the outline of one slat with a pen on a piece of paper to use as a template. Lightly dust each slat with a cloth if needed. Apply acrylic matte medium with a small brush to each piece of fabric to prevent fraying. Make sure the fabric is thoroughly covered. This medium can be purchased from arts and crafts store. Trim the fabric with scissors according to your measurements. You will need one piece of fabric for each vertical blind slat

STEP 4

Attach the fabric to the blinds by using pressure-sensitive vertical backing material, which is similar to double sided tape. This can be found at an arts and crafts store. Use scissors to cut the adhesive according to your slat measurements. You will need one piece of adhesive for each slat.

STEP 5

Peel off the protective layer on the adhesive and place it on the side of the vertical blind slat you wish to cover. Pull off the layer on the other side of the adhesive, which is where you will place the fabric.Carefully place the fabric on the adhesive and make sure it is aligned with the blind slat. Add pressure with your fingers so it adheres to the slat, until it is firmly attached. Smooth out any air bubbles with your fingers.

STEP 6

Slide the slats back into the carriers on the blind and hang them above the window. Pull the control chain to ensure the blinds operate correctly.

SOURCE(S) : http://www.ehow.com/how_6155101_make-vertical-blinds-fabric.html

Sheer Vertical Blinds

google.com, pub-7533433118946337, DIRECT, f08c47fec0942fa0

Luminette Privacy Sheers - Vertical Sheer Window Treatments(Sheer Vertical Blinds)

Sheer Vertical Blinds

Hunter Douglas Luminette Privacy Sheers are vertical sheer window treatment options combining the exquisiteness and fashion of sheers and the confidentiality of soft draperies. These sheers are wonderful window decorations and would improve your interior decor immensely.

Trendy Decorating Option for Extremely Tall Windows
Luminette® Privacy Sheers are considered the perfect option for decorating tall windows, sliding yard doors as well as French doors. These sheers are available in split-stack and side-stack patterns. The side stacks can be opened from the left or right position whereas the split stacks can be opened equally towards both sides. Available in seven varieties of stylish fabrics and in a wide collection of colors and textures, these vertical sheer window treatments add extraordinary beauty to your home.

Extremely Durable and Reliable Window Treatment Solution
The surface fabric and neutral white vanes of Luminette® Privacy Sheers are made of 100 percent polyester and therefore this window treatment is more durable and easy to maintain. The neutral white design of the vanes permanently covers the backside of the surface fabric. This unique vertical sheer window treatment ensures maximum privacy and even light control.

Luminette® Privacy Sheers are designed with cord and band in conjunction and can therefore be operated rather easily. The wand enables to spin the vanes from absolutely wide open to closed positions. These sheers are also incorporated with auto alignment feature. Therefore, the vanes can be effortlessly rearranged by simply rotating them, if misplaced. The SOFTRAK® system hidden behind the material headers assures steady vane spacing and reliability.

Luminette® Privacy sheers are designed with a trim crunchy bottom finishing and hence are resistant to frazzles. These sheers can be ideally used in almost all rooms, including official and casual rooms.

Worldwide Wholesale Floor Coverings - Window Treatments New Jersey - Luminette® Privacy Sheers, the vertical sheer window treatments are suited for expansive walls of windows or French doors.

Source(s) :  http://EzineArticles.com/?expert=James_A_Anderson

Sheer Vertical Blinds

How to Remove Paint from a Hunter Douglas Shade?(Sheer Vertical Blinds)

Sheer Vertical Blinds

It's amazing how fast a do-it-yourself home remodeling project can go from exciting to downright disappointing. When paint finds its way onto surfaces where it doesn't belong, it can put a real damper on a homeowner's enthusiasm. If the paint is still wet, it can usually be cleaned with nothing more than water and a rag for latex paints and a touch of mineral spirits for paints that are oil based. However, once the paint dries, it can become extremely difficult to remove. If you need to remove paint from a Hunter Douglas shade, there are a few techniques you can use that will give you the best chance at success.

STEP 1

Remove the Hunter Douglas shade from the window and place it on a hard surface like a table or a hard, non-carpeted floor.

STEP 2

Scrape away the paint using the plastic putty knife. Move to step 3 if any paint remains.

STEP 3

Apply olive oil to the paint on the shade using a rag. Allow the oil to loosen the paint by letting it soak in for about 10 minutes. Scrape away the paint using the plastic putty knife. Move to step 4 if any paint remains.

STEP 4

Apply mineral spirits to any paint on the shade using a rag. Allow the mineral spirits to loosen the paint by letting it soak in for about 10 minutes. Scrape away the remaining paint using the plastic putty knife.

SOURCE(S) : http://www.ehow.com/how_5993180_remove-paint-hunter-douglas-shade.html

Sheer Vertical Blinds

How to Adjust & Fix Vertical Blinds?(Sheer Vertical Blinds)

Sheer Vertical Blinds

Vertical blinds are made from one of a variety of materials, including vinyl, fabric, wood, faux wood or metal, which make them versatile additions to most decors. Their large size make them appropriate for tall windows and sliding glass doors. After continued use, your vinyl blinds may need minor repair and adjustments. It is possible to fix the blinds yourself with a few basic materials, which will save you money in the long run.

STEP 1

Remove a broken slat, or vane, by sliding a thin, flat object up the vane on the side where the hook is, on the vane carrier. Pull the vane and card down and out of the holder.

STEP 2

Reattach a vane after you have removed the old one. Align the carrier stem where the new vane will go with the rectangular hole in the headrail by pulling on the chain. Push a piece of string through the hole in the carrier stem. Push the stem into the carrier body. Pull the chain and align the other stems with the one you are going to replace. Grab both ends of the string and gently pull downward to move the stem back in place. Slide the vane into the grooves and snap it into place.

STEP 3 

Shorten the pull cord on your vertical blinds if it is too long. Look inside the headrail and locate the vane carrier where the cord is tied in a knot. Hold that vane carrier with one hand, and with the other, pull out the extra cord until the cord safety device reaches the desired length. Tie a knot in the cord at that location. Pull the control chain to ensure the blinds work properly, then cut the excess cord half an inch below the knot.

STEP 4

Create an overlap if there are gaps between adjacent blinds. Look inside the headrail of one blind and locate small, white tubes. Pry off one of the white tubes so the vanes move closer to the edge of the headrail, which should eliminate any gaps.

STEP 5

Pry off the control end cap with a flat screwdriver from the headrail if the control chain is difficult to operate. Locate the pulley with a metal rod in the middle. Find the round washer that has a jagged hole in the center. Gently tap the control rod on the end to loosen it. This should make the control chain easier to operate.

 

SOURCE(S) : http://www.ehow.com/how_6069955_adjust-fix-vertical-blinds.html

Sheer Vertical Blinds