How to Hang Vertical Blinds?(Sheer Vertical Blinds)

Sheer Vertical Blinds

Vertical blinds can do a lot for a room. They add a clean and streamlined appearance as well as keep out the glaring sun that heats up the room. The blinds can also add color to the room if you go with the wooden or decorative blinds. Follow these instructions to learn how to hang vertical blinds.


STEP 1
Check to make sure all of the necessary hardware came with your blinds. If it did not or you did not buy the blinds, then go to a home store such as Home Depot or Lowe's. The courtesy clerks can guide you to the right spot.


STEP 2
Place the tape measure on the floor and measure up to your window, then add a quarter inch to this measurement. Mark this spot. This is where you will place the top screw.


STEP 3
Position the installation bracket 3 to 4 inches from each end of the head rail on the wall. Screw in the bracket. Install additional brackets across the handrail spaced equally apart and tighten all of the screw securely.


STEP 4
Decide what side you would like the control chain and traverse cord to hang on. Center the head rail to the mounting clips and insert the front lip of it into the groove located at the front of the clips. Turn the back of the head rail until it clicks in to the back of the clip and repeat for each clip.


STEP 5
Open the blinds so that the vane holders are spaced apart evenly. Turn the chain until the stem openings face toward you and snap in all the vanes so that the curves face the same way.


STEP 6
Attach the tension pulley to the bottom of your baseboard. Put the loop of your vertical cord through the top of the pulley. Pull the tension cord until the tension pulley becomes tight with a small pull on the string.


STEP 7
Mark the cord at this spot in the track using a pencil. Release the cord from the pulley, pull it out again and tie a knot in this spot. Put the loop back in the pulley and try to open and close the blinds. If they work properly cut the extra cord below the knot.


SOURCE(S) : http://www.ehow.com/how_2066694_hang-vertical-blinds.html

Sheer Vertical Blinds

How to Buy Blinds?(Sheer Vertical Blinds)

Sheer Vertical Blinds

Blinds are a popular window treatment choice because of their durability, affordability and appearance. With so many styles and materials to choose from, buying the right blinds for your home can seem overwhelming. Buying blinds is actually quite simple and just requires some product knowledge and careful planning. Read on to learn more.


STEP 1
Choose vertical or horizontal blinds. Which you buy depends on window size, room placement and personal taste. Horizontal blinds are great for bedrooms as they block out more light. Vertical blinds are often best for oversized windows, as you can custom order them in almost any size. In addition, horizontal blinds can get very heavy and hard to operate on long windows, so vertical blinds can be a more practical option.


STEP 2
Determine your budget. Installing blinds throughout a home can cost from hundreds to thousands of dollars, depending on the style, material and brand you choose. Even the most expensive blinds are generally far less expensive than curtains and drapes. Aluminum mini-blinds are often cheapest and wood blinds are usually the most costly.


STEP 3
Pick a material. Vertical blinds come in fabric and PVC vinyl. Some fabric blinds are sheer, allowing light in through sheer fabric when partially open. Horizontal blinds, also called Venetian blinds, come in aluminum, faux wood and wood. Faux wood blinds look like the real thing, but are heavier and cheaper. Buy blinds in a material that complements your décor and will hold up best in a room.


STEP 4
Measure your windows. It's crucial that you take precise measurements, particularly if you're buying custom blinds that are non-refundable. Always use a metal measuring tape, take each measurement twice and write down all measurements. How you measure depends on whether you'll mount blinds inside or outside the window and the type of blinds you purchase.


STEP 5
Buy blind accessories. Valances add a classy, finished look to vertical and horizontal blinds and come standard with some models. Motorized blinds are easy to operate via remote control and eliminate child safety risks associated with blind cords.


SOURCE(S) : http://www.ehow.com/how_2122458_buy-blinds.html

Sheer Vertical Blinds

How to Measure Your Sliding Door for Blinds and Vertical Sheers?(Sheer Vertical Blinds)

Sheer Vertical Blinds

Are you wanting to add a new blind to your sliding door, but not quite sure how to measure correctly? The following article will give you easy step by step instructions. You will be able to purchase your new treatment with confidence in knowing it will fit properly!


STEP 1
Measure the width of the door/ window from opening to opening. If your window has trim around it, then measure the window from outside of trim to outside of trim.


STEP 2
Add a minimum of 4" to each side ( 8" total). This will be your total finished width, and will allow for maximum privacy on your window.


STEP 3
Measure the length of the window on the right and left sides to be sure they are somewhat the same. Measure from the top of the opening to the floor. Again, if your window has trim, then include that in this measurement as well.


STEP 4
Add a minimum of 4" to this measurement as well to allow for proper fit of brackets when installed. This will be your total finished length.


STEP 5
Decide which direction you want your blind to open... towards the right? Towards the left? Some people even prefer a split draw, where the blind opens from the middle, like a draw drape.


STEP 6
Decide which side you want your operating cords. They may be more accessible from one side or the other.


STEP 7
You are now ready to order/ purchase your blind!


SOURCE(S) : http://www.ehow.com/how_4799230_sliding-door-blinds-vertical-sheers.html

Sheer Vertical Blinds

How Do Vertical Blinds Work?(Sheer Vertical Blinds)

Sheer Vertical Blinds

Introduction

1. Vertical blinds are an excellent solution for a large window or glass door. They're easy to operate, provide convenient opening and closing to allow for the light conditions that you want at any given time, and easily slide out of the way so you can use the door or open the window. Whether you're trying to troubleshoot and repair blinds that aren't working or you're just curious, deciphering how blinds work can be a bit confusing. This article will focus on the operation of standard vertical blinds that use a blind wand.

Sliding

2. Vertical blinds include a sliding mechanism that allows you to slide them out of the way so that you can open a door or window. Each individual blind vane is attached to a sliding piece that is inserted into the track that runs along the head rail of the blinds. When you pull the blind wand open or closed, the blinds slide in unison one way or the other on the track. Before sliding out of the way, you should be sure that the blinds are open so that they don't get stuck together and impede motion.

Turning

3. The second operation of blinds involves turning the blinds open to let light in or closed to keep light out. There is a bit more componentry going on in this operation, but it's still pretty simple to assess. The blind wand is attached to a gear mechanism. When you turn the blind wand, the gear turns and in effect causes the axle that runs the length of the head rail to turn. Each blind is also connected to a small gear mechanism that is turned by the spinning axle. The result is that each blind vane is opened or closed by its individual gear.

Turning Repair

4. Anyone who has ever used blinds before knows that they can break down pretty regularly. The turning function is particularly prone to misoperation and breakage. Gears wear easily, and once the teeth on a gear wear down, the blinds won't operate properly. If none of the blinds are working and the axle is not moving, first check to make sure that all the individual vanes are properly aligned and facing the same direction. Sometimes vanes face the wrong direction and prevent proper turning. If this isn't your issue, there's likely a problem with the gear box attached to the blind wand. Remove the wand and try repairing or replacing the box. Make sure that the gear is properly aligned. If it is just one blind piece that isn't turning, the problem is probably a stripped gear on that blind. Adjust or replace the gear. Follow the resource link below for a good blind parts Website or contact the manufacturer of your blinds for warranty or parts.

Sliding Repair

5. A possible issue with sliding is that the blinds won't properly slide closed. Since each blind vane is linked to the track individually, they won't slide in unison if they become disconnected. While they will still slide open, since one blind will push the next, they may not slide back closed. In this case your blind wand may just slide on its own without pulling the actual blinds. There is usually a thin wire that connects each blind slider with the next located over the metal axle. If the blinds aren't working, the wire is probably disconnected or broken and should be replaced.

Source(s) : http://www.ehow.com/how-does_4740659_vertical-blinds-work.html

Sheer Vertical Blinds

google.com, pub-7533433118946337, DIRECT, f08c47fec0942fa0

About Vertical Blinds(Sheer Vertical Blinds)

Sheer Vertical Blinds

Vertical blinds are a traditional treatment for patio doors because they allow easy access to the outside and privacy in the inside. Whether the house is contemporary or traditional in decor, vertical blinds offer flexibility, privacy, insulation, light control and accessibility. Now, vertical blinds are also a practical choice for patio doors and windows. Today, they are more attractive because of the many designs and styles available to match every decor.


Identification
1. Use vertical blinds as treatments on sliding patio doors, windows wider than they are high and windows that slide from side to side. Most blinds open and close with a wand control that rotates the vanes and moves them along a head rail. A valance hides the head rail and adds a decorative touch.

Types
2. Vertical blinds are available in a variety of materials, making decorating easier than in the past, when blinds were mostly vinyl and unattractive. Blinds can be fabric, vinyl, aluminum, cellular, faux wood, real wood, sheer and even metallic.

Function
3. Vertical blinds are functional. They are energy efficient if insulated and reduce air-conditioning costs by lowering the heat transfer passed through windows. Solar blinds reflect heat. The amount of light entering the room is controlled by rotating the blinds or purchasing blinds specific to light control.


Effects
4. Vertical blinds have a number of options. They can slide to the right, left, or have a split stack. S-curved vanes are great for maximum light control. Wand controls allow the vanes to rotate open and closed and move across the head rail with ease. Motorized blinds rotate vanes with a push of a button.

Considerations
5. Cleaning blinds is easy, regardless of the material. Vinyl, aluminum, and metallic style blinds can be wiped down with mild soap and water. Wood blinds can be polished, and fabric blinds work best if vacuumed.Prices vary depending upon the style, operation, and material. Patio-door blinds are as little as $29.99. Higher-end blinds start at $100.Levolor and Bali are well-known names in the window business. They offer quality vertical blinds and can customize to fit all doors and windows. Their websites explain how to measure for the perfect fit.


Source(s) : http://www.ehow.com/about_4598571_vertical-blinds.html

Sheer Vertical Blinds google.com, pub-7533433118946337, DIRECT, f08c47fec0942fa0